To
make a pen-drive bootable you need to know some very simple commands so here i
am going to show you some steps to make a pendrive bootable :
1:Open cmd and select run as administrator.
2:Now enter command diskpart and press enter.
3:Now enter command list disk and press enter.
4:Now here you can see that disk0 is hard disk and disk 2 is pendrive
.so to select pendrive enter command select disk 1and press enter.
5:Now you have to clean your pendrive,to clean type command clean and press enter.
6:After cleaning pendrive enter command create partition
primary and press enter.After creation of
partition enter command select partition 1 to select your
partition and press enter.
7:Type command active and press enter.this
command activate your selected partition.
8:Now type command format fs=fat32 and press enter.wait
for a little.and after completion of this command type exit and press enter.
now your bootable pen drive is ready to use copy all the files from dvd and
past in pendrive.
No comments:
Post a Comment